Aakash Steel is a leading manufacturer and exporter of Nickel 201 Plates in India. We have well reputed name as Nickel 201 Sheet Suppliers and Nickel 201 Plate Suppliers. Nickel 201 Sheets offer Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations. Nickel 201 Sheets has extremely low work and a low annealed rigidity – toughening rate. The elemental restrictions of Alloy 201 Plates are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics.
Nickel Alloy 201 Sheet is designated as UNS N02201 and Werkstoff Number 2.4068. Our offered Alloy 201 Plate exhibit good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. All hot working and cold working practices can be utilized when shapingNickel Alloy 201 Plate. Due to its improved ductility and resistance to graphitisation this Nickel Alloy 201 Coil is used for combustion boats, plater bars, caustic evaporators, and electrical components. Nickel 201 Clad Plate is approved for service up to 1230° F. Melting point of Nickel 201 Strips & Nickel UNS N02201 Shim Sheet is 2615-2635° F. Nickel Alloy 201Rolling Sheets can be cold formed by standards methods.
ASTM B162 UNS N02201 Plate is normally limited to service at temperatures below 600° F. At higher temperatures, Nickel 201 Coils can suffer from graphitization which can result in severely compromised properties. WNR 2.4068 Sheets are approved for the construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Alloy 201 Hot Rolled Plate is approved for service up to 600° F. Alloy 201 Coils Melting point is 2615-2635° F and used in food handling machinery.
Nickel 201 Diamond Plate also known as a floor plate, chequered plate, and tread plate is a type of metal designed with lines on one side, with the reverse side being featureless or a regular pattern of raised diamonds. We specialize in Nickel Alloy 201 Plate. We have huge ready stock of Nickel 201 Hot Rolled (HR) Sheet, Nickel 201 Coils, Nickel 201 Cold Rolled (CR) Plates, Nickel 201 Shim Sheet, Nickel 201 Plain Sheets, Nickel 201 HR Plates, Nickel 201 Perforated Sheets & Plates, Nickel 201 Galvanized Plates & Sheets in our inventory at best price. Nickel Alloy 201 sheet thickness varies and it can also be acquired based on the requirement of the client.Get Nickel 201 Plate Price in India.
At the time of manufacturing superior technology, as well as extensive quality control from steelmaking to finishing, assure the stable production of DIN 2.4068 Plate in uniformly of excellent quality. We apply the process of surface finishing to our Nickel Alloy 201 Plate by pickling or buff-polishing. Nickel Alloy 201 Strips levels of finishing & cut can be adjusted according to customer requirements. Alloy 201 Plate is available in the form of Sheet, Plain Sheet, Shim Sheet, Foils, Coils, Rolls, Strip, Flats, Clad Plate, Rolling Sheet, Flat Shim, Rolling Plate, and Flat Sheet. Nickel 201 Plate Weight Calculator allows you to calculate an estimate of the weight of various sizes of Nickel Alloy 201 plates based on shape and dimensions.
Nickel 201 Plate Specifications
| Specifications |
ASTM B162 / ASME SB 162 |
| Nickel 201 Sheet AMS |
AMS 5553 |
| Size |
1000 mm x 2010 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2010 mm x 2010 mm, 2010 mm x 2010 mm |
| Thickness |
0.1mm to 12 mm Thk |
| Form |
Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Nickel Alloy 201 Plate Types
| AMS 5553 Nickel 201 Sheet |
Nickel 201 AMS 5553 Plate |
| Nickel 201 Hot Rolled Plates |
Nickel 201 Cold Rolled Plates |
| Nickel Alloy 201 Hot Rolled Plate |
Nickel 201 Cold Drawn Sheet |
| 2B finish Nickel 201 sheet |
Cut to size Nickel 201 plate |
| Nickel 201 Galvanized Sheets |
Nickel 201 Ring Coils |
| Cold rolled Nickel 201 sheet |
Hot rolled Nickel 201 plate |
| 2B BA Hairline Mirror finish Nickel 201 plates |
Brush Nickel 201 Plate |
| Nickel WERKSTOFF NR. 2.4068 Foils |
Polished Nickel 201 Sheet |
| Perforated Nickel 201 Sheet |
Nickel 201 2B Plate |
| ASTM B162 UNS N02201 Steel Plate |
Nickel 201 Cold Rolled Coils |
| 8K Mirror Finish Nickel 201 Sheet |
Hairline Nickel 201 Sheet |
| No.4 Nickel 201 Sheet |
Nickel 201 Diamond Plate |
| Thin Nickel 201 Sheet |
Nickel 201 Rolls Sheets |
| Nickel 201 Design Sheet |
Nickel 201 Expanded Sheet |
| 201 Alloy Shim Sheets |
Nickel Alloy 201 Sheets |
| Nickel 201 Clad Plate |
Nickel 201 Strip |
| Nickel 201 Shim Stock |
Nickel 201 Quarto Plate |
| Nickel 201 Polished Plates |
Nickel 201 Perforated Sheet |
| Cut to Size Nickel 201 Sheet |
Nickel 201 Annealed Strip |
| Bright Annealed Nickel 201 Sheet |
Nickel 201 Corrugated Sheet |
| Nickel 201 HR Sheets |
ASTM B162 Nickel 201 Sheets |
| Nickel 201 Floor Sheet |
Nickel 201 Diamond Sheet |
| Nickel 201 Coils |
Nickel 201 Chequered Plate |
Equivalent Grades of Nickel 201 Sheet Plate
| STANDARD |
UNS |
WERKSTOFF NR. |
EN |
JIS |
BS |
GOST |
AFNOR |
| Nickel 201 |
N02201 |
2.4068 |
LC Ni 99.2 |
NW 2201 |
NA 12 |
НП-2 |
– |
Nickel 201 Sheet Chemical Composition
| Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
| Nickel 201 |
0.2 max |
0.35 max |
0.35 max |
0.01 max |
0.25 max |
0.40 max |
99.0 min |
Alloy 201 Sheet & Plate Mechanical Properties
| Grade |
Density |
Tensile Strength |
Yield Strength (0.2%Offset) |
Melting Point |
Elongation |
| Nickel 201 |
8.9 g/cm3 |
Psi – 67000 , MPa – 462 |
Psi – 21500 , MPa – 148 |
1446 °C (2635 °F) |
45 % |
Nickel 201 Sheet Size
| PRODUCT FORM |
ALLOY |
DIMENSION |
| Strip; cold rolled, annealed |
NICKEL 201 (99.0 Ni min) |
0.10×56.5 mm x coil, 0.05 kg/m |
| Strip; cold rolled, annealed |
NICKEL 201 (99.0 Ni min) |
0.15×3 mm x coil, 0.004 kg/m |
| Strip; cold rolled annealed |
NICKEL 201 (99.0 Ni min) |
0.15×5 mm x coil, 0.007 kg/m |
| Strip; cold rolled, annealed |
NICKEL 201 (99.0 Ni min) |
0.15×7 mm x coil, 0.009 kg/m |
| Strip; annealed |
NICKEL 201 /201 (99.0 Ni min) |
0.15×150 mm x coil, 0.20 kg/m |
| Sheet; cold rolled, soft annealed, descaled, sheared |
NICKEL 201/201 (99.0 Ni min) |
3.0x1201x3000 mm, 95.9 kg/pc |
Nickel 201 Plate Thickness
| Alloy 201 PLATE METRIC DIMENSIONS |
| SURFACE FINISH |
THICKNESS (MM) |
WIDTH (MM) |
| 2B – Cold rolled, heat treated, pickled, skin passed |
0.25–8.0 |
max. 2032 |
| 2D – Cold rolled, heat treated, pickled |
0.4–6.35 |
max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled |
0.4–8.0 |
max. 2032 |
| 2R – Cold rolled, bright annealed |
0.25–3.5 |
max. 1524 |
| 2H – Work hardened |
0.4–6.35 |
max. 1524 |
| Polished, brushed |
0.5–4.0 |
max. 1524 |
Nickel 201 Plates Imperial Dimensions
| Width (in) |
Surface finish |
Gauge (in) |
| max. 72* |
2B – Cold rolled, heat treated, pickled, skin passed |
10–24 |
| max. 60 |
2D – Cold rolled, heat treated, pickled |
12–24 |
| max. 48 |
BA Mexinox only |
18–28 |
| max. 60 |
Polished (not brushed) |
11–24 |
| max. 48 |
Temper rolled Mexinox only |
13–29 |
Nickel 201 Plate Weight
| Density 0.322 lbs/in³ 8.92 g/cm³ |
| Thickness |
Thickness |
Plate Weight Per Unit Area |
| 3/16 inches |
0.1875 inches 4.7625 mm |
0.0626 lbs/in² 44.01215696 kg/m² |
| 1/4 inches |
0.25 inches 6.3500 mm |
0.0835 lbs/in² 58.7063116 kg/m² |
| 5/16 inches |
0.3125 inches 7.9375 mm |
0.1044 lbs/in² 73.40046624 kg/m² |
| 3/8 inches |
0.375 inches 9.5250 mm |
0.1252 lbs/in² 88.02431392 kg/m² |
| 1/2 inches |
0.500 inches 12.7 mm |
0.167 lbs/in² 117.4126232 kg/m² |
| 9/16 inches |
0.562 inches 14.2748 mm |
0.18417 lbs/in² 129.4843282 kg/m² |
| 5/8 inches |
0.625 inches 15.875 mm |
0.20464 lbs/in² 143.8761629 kg/m² |
| 3/4 inches |
0.750 inches 19.05 mm |
0.24556 lbs/in² 172.645771 kg/m² |
| 7/8 inches |
0.875 inches 22.225 mm |
0.28649 lbs/in² 201.4224097 kg/m² |
| 1 inches |
1.000 inches 25.4 mm |
0.32742 lbs/in² 230.1990484 kg/m² |
| 1 1/4 inches |
1.250 inches 31.75 mm |
0.40928 lbs/in² 287.7523259 kg/m² |
| 1 1/2 inches |
1.500 inches 38.1 mm |
0.49113 lbs/in² 345.2985726 kg/m² |
| 1 3/4 inches |
1.750 inches 44.45 mm |
0.57299 lbs/in² 402.8518501 kg/m² |
| 2 inches |
2.000 inches 50.8 mm |
0.65484 lbs/in² 460.3980969 kg/m² |
| 2 1/4 inches |
2.250 inches 57.15 mm |
0.73669 lbs/in² 517.9443436 kg/m² |
| 2 1/2 inches |
2.500 inches 63.5 mm |
0.81855 lbs/in² 575.4976211 kg/m² |
| 2 3/4 inches |
2.75 inches 69.85 mm |
0.9004 lbs/in² 633.0438678 kg/m² |
| 3 inches |
3.000 inches 76.2 mm |
0.98226 lbs/in² 690.5971453 kg/m² |
| 4 inches |
4.000 inches 101.6 mm |
1.30968 lbs/in² 920.7961937 kg/m² |
Prime Countries Where We Supply & Export Nickel Alloy 201 Sheets & Plates
ASTM B162 Nickel 201 Sheets Used in
After inspection care is taken towards packing of the products, before dispatching Nickel 201 plate, Alloy 201 Sheets, and Nickel Alloy 201 Coils went through strict quality tests and delivered to their respective customers worldwide. We focus on every procedure to assure quality of Alloy 201 Coils. We offers just about everything to meet your 201 Nickel Sheets, Alloy 201 Plates, and 201 Nickel Coils pack requirements to industry.
![]()
Off-Shore Oil Drilling Companies
![]()
Pharmaceutical & Biotechnology Processing
![]()
Fertiliser Heavy Engineering
